| Section 3.1 | Parallel ordering for the direct sparse solver |
| Section 4.2 | Enhancements to distributions |
| Section 5.2 | Model import from ANSYS input files |
| Section 5.6 | Enhanced support for translation of NASTRAN bulk data files |
| Section 6.1 | Iterative equation solver |
| Section 6.2 | Dynamics enhancements |
| Section 6.3 | Contour integral evaluations based on the extended finite element method (XFEM) |
| Section 6.4 | Dissimilar mesh support for Abaqus/Standard to Abaqus/Explicit co-simulation |
| Section 6.5 | Global damping and damping controls in matrix and substructure generation procedures |
| Section 6.6 | Improved integration scheme in random response analysis |
| Section 6.7 | Use of arbitrary dynamic modes for substructure generation |
| Section 6.8 | Enhancements to coupled structural-acoustic analysis |
| Section 6.9 | Enhancements to steady-state dynamics user interface |
| Section 6.10 | Direct cyclic analysis in Abaqus/CAE |
| Section 6.11 | Improvement to the AMS eigensolver |
| Section 7.5 | Transferring results with concrete damaged plasticity |
| Section 7.6 | Finite-strain viscoelasticity |
| Section 7.7 | Finite-strain viscoelasticity with Mullins effect |
| Section 7.8 | Field expansion |
| Section 7.9 | Viscous dissipation in a coupled analysis |
| Section 9.3 | Reading nodal output for temperature, normalized concentration, and electric potential from an output database into predefined field variables |
| Section 10.2 | General contact performance |
| Section 10.3 | General contact diagnostics |
| Section 10.4 | Visualizing initial strain-free adjustments |
| Section 12.2 | Element nodal forces in beam section orientations |
| Section 12.3 | PSD and RMS Mises stress contour and history plots from random response analysis |
| Section 12.4 | Enhancements to output from direct steady-state dynamic analysis |
| Section 13.1 | Utility routines to obtain parallel processes information |