Whole element variables:

The connector relative acceleration, previously available only for history output, can now be requested for field output.

The components of connector plastic motion-based damage initiation criterion in all directions, previously available only for history output, can now be requested for field output.

The all flags for connector failure status, previously available only for history output, can now be requested for field output.

The connector relative position, previously available only for history output, can now be requested for field output.

Equivalent plastic relative motion for a coupled plasticity definition is now available in addition to equivalent plastic relative displacements and rotations in all directions.

Equivalent plastic relative motion for a coupled plasticity definition is no longer available for field output.

The connector relative velocity, previously available only for history output, can now be requested for field output.

Number of cycles to initialize the crack at the enriched element.

Total electrical energy dissipated due to flow of current. This variable is now also available for a time-harmonic eddy current analysis.

Strain energy release rate when the XFEM-based LEFM approach is used.

Current values of distributed (heat or concentration) fluxes (not available for nonuniform fluxes), including those imported using the HFL co-simulation field ID.

Element integration point variables:

Predefined field variables, including those imported using the FV_i co-simulation field ID.

Direction cosines of the local material directions for an anisotropic hyperelastic material model.

Mises equivalent stress. When MISESONLY is requested instead of MISES, the stress components are not written to the output database (.odb) file; consequently, the size of the database is reduced.

Equivalent pressure stress. When PRESSONLY is requested instead of PRESS, the stress components are not written to the output database (.odb) file; consequently, the size of the database is reduced.

Temperature, computed as a mass fraction weighted average of all materials in the element.

Element centroidal variables:

Magnitude and components of the magnetic flux density in a time-harmonic eddy current simulation.

Magnetic body force intensity vector (force per unit volume per unit time) due to flow of current.

Magnitude and components of the eddy current vector in conducting regions of a time-harmonic eddy current simulation.

Magnitude and components of the electric field in a time-harmonic eddy current simulation.

Magnitude and components of the magnetic field in a time-harmonic eddy current simulation.

Rate of Joule heating (amount of heat per unit volume per unit time) due to flow of current.

Surface variables:

Area-averaged surface pressure.

Area-averaged surface temperature.

Area-averaged surface velocity vector.

Damage variable for bond failure.

Total fluid force components on the surface.

Integrated normal heat flux on a given surface.

Heat flux vector on a surface.

Normal heat flux on a surface.

Integrated mass flow rate across a given surface.

Fluid normal traction on a surface.

Fluid pressure force on a given surface.

Fluid surface (or shear) traction on a surface.

Area of a surface.

Fluid total traction on a surface.

Fluid viscous force on a given surface.

Integrated volume flow rate across a given surface.

Fluid shear stress magnitude on a surface.

Wall-normal distance measured in viscous lengths or wall units.

Wall-normal distance scaled using turbulent kinetic energy and viscosity.

Integrated variables:

Total mass of each Eulerian material instance in the element set.

Total volume of each Eulerian material instance in the element set.

Element variables:

Energy dissipation rate.

Turbulent kinetic energy.

Nodal variables:

All components of point loads and concentrated moments, including loads imported using the CF co-simulation field ID.

Concentrated fluid flow at a node, including those imported using the CFLOW co-simulation field ID.

All concentrated flux values, including those imported using the CFL co-simulation field ID.

Error indicators for contact stress components.

All temperature values at a node, including those imported using the TEMP co-simulation field ID.

Energy dissipation rate.

Turbulent kinetic energy.

Element face variables:

Uniformly distributed pressure load on element faces, including those imported using the PRESS co-simulation field ID.

Whole and partial model variables:

Electrical energy dissipated due to flow of electrical current. This variable is now also available for a time-harmonic eddy current analysis.